Device for the tiler for quick, precise and clean application of glue on ceramic tiles, porcelain stoneware, granite etc.
10x faster glue application on the plate than with the traditional method.
The entire surface of the tile is covered with glue of the same thickness.
Laying tiles faster. Flattening and leveling tiles reduced to a minimum thanks to the even layer of glue.
Applying glue to the plate in a convenient way.
Easy to wash, simple and safe to use and transport.
Strong and rigid structure. Thick sheet 1 mm!
The device is adapted to be mounted on a flat surface.
Possible settings for the width of the applied adhesive: from 0 to 60 cm.
If the layer of the applied adhesive on the tile is to be applied with a comb, and the adhesive on the floor / wall is applied "smoothly", then an element with 8x8 mm teeth should be used.
If the layer of adhesive applied to the tile is to be smooth, and the adhesive is applied to the floor / wall with a comb, an element without teeth should be used.
Before starting work, you only need to set the width of the applied adhesive layer (tile width max. 60 cm) by tightening the sides of the device to a flat surface (table top, floor, etc.), and then set the height of the comb at least above the tile so that it does not touch it. The height of the comb above the tile can be set anywhere from 0 to about 3 cm depending on the thickness of the tile.